Adlink IMB-S90 Manual do Utilizador

Advance Technologies; Automate the World.IMB-S90 IPMI AMI MegaRAC SP-X Firmware Manual Revision: 1.00 Revision Date: November 22, 2013 Part Numbe

IMB-S90 IPMI User’s Manual 10 • Direct LDAP support from the device • Open LDAP (Generic LDAP) supported 2.7 Remote Server Power Control • Serve

IMB-S90 IPMI User’s Manual 100 3.8.3.1 Procedure: 1. Click the Java SOL button to open the Java SOL window. Java SOL 2. Enter the BMC IP address,

IMB-S90 IPMI User’s Manual 101 Java SOL 3.9 Auto Video Recording The Auto Video Recording consists of the following. • Triggers Configuration • Re

IMB-S90 IPMI User’s Manual 102 3.9.1 Triggers Configuration This page is used to configure the triggers for various events, which can be used by the

IMB-S90 IPMI User’s Manual 103 3.9.1.1 Procedure: 1. Check the events to be enabled. 2. To set particular Date and Time Event, check the option Pa

IMB-S90 IPMI User’s Manual 104 3.9.2.1 Procedure: 1. Click Advanced Settings. Advanced Remote Video Settings a. Check Enable to enable the Remote

IMB-S90 IPMI User’s Manual 105 3.10 Maintenance Group This group of pages allows you to do maintenance tasks on the device. The menu contains the fo

IMB-S90 IPMI User’s Manual 106 Save: To save any changes made. Note: This configuration is used by Restore Factory Defaults process. Reset: To reset

IMB-S90 IPMI User’s Manual 107 3.10.1.1.5 Network Following files will be preserved. dhcp.conf: This file is to configure the host name in the FQDN

IMB-S90 IPMI User’s Manual 108 hostname.conf: This file is used to configure the host name creation method Manual/Automatic for the BMC. Vlaninterfa

IMB-S90 IPMI User’s Manual 109 3.10.1.1.7 SNMP Following files will be preserved. snmp_users.conf: This file contains the NSMP user configurations s

IMB-S90 IPMI User’s Manual 11 • Single JAR for Standalone app • Keyboard mapping in KVM to send the correct codes as per host • KVM localization

IMB-S90 IPMI User’s Manual 110 activedir.conf: This file contains the configurations such as sslenable, timeout, racdomain, adtype, adfilterdc1, adf

IMB-S90 IPMI User’s Manual 111 Restore Configuration 3.10.2.1 Procedure 1. Click Enter Preserve Configuration to redirect to Preserve Configuration

IMB-S90 IPMI User’s Manual 112 Change Password: To change the user’s password. Note: Password, Confirm Password: • Password must be at least 8 char

IMB-S90 IPMI User’s Manual 113 3.11.1 Firmware Update This wizard takes you through the process of firmware upgradation. A reset of the box will aut

IMB-S90 IPMI User’s Manual 114 Preserve All Configurations: To preserve all the listed configurations. Upload SignImage Key: To upload the Sign Imag

IMB-S90 IPMI User’s Manual 115 Upload Firmware d. Verifying Firmware Image In Section Based Firmware Update, you can configure the firmware image

IMB-S90 IPMI User’s Manual 116 3.11.2 Image Transfer Protocol This page is used to configure the firmware image protocol information. To open Image

IMB-S90 IPMI User’s Manual 117 4. Enter the Retry Count value. 5. Click Save to save the changes. 6. Click Reset to reset the entered values. 3.12 L

IMB-S90 IPMI User’s Manual 118 Launching JViewer Stand Alone Application from Windows command prompt 3.13.2 Launching from Linux Launching JViewe

IMB-S90 IPMI User’s Manual 119 Note: It is not mandatory to specify any of these arguments while launching the app form command prompt or terminal.

IMB-S90 IPMI User’s Manual 12 3 SP-X Web GUI 3.1 MegaRAC® GUI Overview The MegaRAC® SP-X on SoC has an AMI generic, user-friendly Graphics User I

IMB-S90 IPMI User’s Manual 120 3.13.3 Launching from GUI based environment 1. While launching the JViewer Stand Alone Application from GUI based e

IMB-S90 IPMI User’s Manual 121 3.14 FLASH Tools The Flash Tools are command line utility programs used to upgrade the firmware using different mediu

IMB-S90 IPMI User’s Manual 122 - force-boot Option to FORCE BootLoader upgrade during full upgrade - preserve-config Option Preserve configuratio

IMB-S90 IPMI User’s Manual 123 ‘-u’ Option to enter UserName, When using Network Medium ‘-p’ Option to enter Password, When using Network Medium -kc

IMB-S90 IPMI User’s Manual 124 Description: This command works with network medium using the ipv6 address 2000::2005, which start to flash the new r

IMB-S90 IPMI User’s Manual 125 Description: This command works with network medium using the ip 155.166.132.12, which start to flash the new rom.ima

IMB-S90 IPMI User’s Manual 126 start to flash the new rom.ima to the firmware with preserving SEL and IPMI as well as selected configurations. Eg11:

IMB-S90 IPMI User’s Manual 127 Eg9: ./Yafuflash –kcs public.pem –replace-publickey Description: This command works with KCS medium which replaces th

IMB-S90 IPMI User’s Manual 128 - i Option to interactive upgrade (Upgrade only required modules)** -ignore-module-location Option use to skip th

IMB-S90 IPMI User’s Manual 129 3.15.2.1 Examples of Network Medium Eg1: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin rom.ima -info Descript

IMB-S90 IPMI User’s Manual 13 • RHEL 6.2 -32 bit • RHEL 6.2 -64 bit • Ubuntu 12.04 LTS -32 • Ubuntu 12.04 LTS -64 • Ubuntu 11.10 -32 • Ubuntu

IMB-S90 IPMI User’s Manual 130 Description: This command works with network medium using the ip 155.166.132.12, which displays the details of Existi

IMB-S90 IPMI User’s Manual 131 Screen: If Existing and current images are same. FG: 2 Existing and current are different.

IMB-S90 IPMI User’s Manual 132 FG: 3 Interactive Upgrade Mode. 3.15.2.2 Examples for USB Medium: Eg1: ./Yafuflash –cd rom.ima -info Description: T

IMB-S90 IPMI User’s Manual 133 Eg8: ./Yafuflash –cd -img-info Description: This command works with USB medium which displays the details of Existing

IMB-S90 IPMI User’s Manual 134 Description: This command works with KCS medium, which start to flash the new rom.ima using interactive upgrade mode

IMB-S90 IPMI User’s Manual 135 Description: This command works with network medium using the ip 155.166.132.12, which starts to flash the new rom.im

IMB-S90 IPMI User’s Manual 136 -Ignore-module-location Option use to skip the user interaction if the flashing image is Contains different module

IMB-S90 IPMI User’s Manual 137 Description: This command starts to flash the new rom.ima to the firmware with FORCE BootLoader upgrade. Eg4: Yafufla

IMB-S90 IPMI User’s Manual 138 3.16 EFI base YAFUKCS 3.16.1 Installation 1. Copy Yafukcs_uefi\obj\Yafukcs.efi to any USB mass storage device. 2. Bo

IMB-S90 IPMI User’s Manual 139 Error Codes Macro Used Definition 0x07 YAFU_NAME_LONG Parameter Size exceeds 1. Public key File Name Size Exc

IMB-S90 IPMI User’s Manual 14 3.2 User Name and Password Initial access of MegaRAC SP-X prompts you to enter the User Name and Password. A screensh

IMB-S90 IPMI User’s Manual 140 2. Go to VMCLI folder and execute the installer script to install the VMCLI service. Installer.bat –i 3. Installer

IMB-S90 IPMI User’s Manual 141 -c CD/DVD Drive and CD/DVD Image -f Floppy Drive and Floppy Image -hd Hard Disk Drive, Hard Disk Image and USB

IMB-S90 IPMI User’s Manual 142 VMCLI Screen 1 The above VMCLI Screen 1 starts VMCLI service without command line argument ie, configuration will be

IMB-S90 IPMI User’s Manual 143 3.17.2.2 Examples of CD-ROM Media redirection Eg1: sc start VMCLI -r 10.0.6.8:443 -u admin -p admin -c E:\ Descripti

IMB-S90 IPMI User’s Manual 144 3. Create a force link as libcrypto.so.0.9.8e to libcrypto.so.4: ln -sf libcrypto.so.0.9.8e libcrypto.so.4 4. Copy

IMB-S90 IPMI User’s Manual 145 Media Drive Device name like /dev/sda, /dev/sdb Note: Device name should not include partition name like /dev/sda1,

IMB-S90 IPMI User’s Manual 146 Description: This command is to redirect the CD/DVD drive from the management station to the host. Eg2: IPv4: service

IMB-S90 IPMI User’s Manual 147 3.17.3.2 Configuration File Support VMCLI supports the configuration file to pass the argument to the VMCLI service.

IMB-S90 IPMI User’s Manual 148 3.18 SOL One of the powerful tools in IPMI is Serial Over LAN (SOL) which provides serial line access over the manage

IMB-S90 IPMI User’s Manual 149 Appendix A A.1 Ports Usage Port # Owner Module Usage 80 Web server (webgo/ lighttpd) Listening for network c

IMB-S90 IPMI User’s Manual 15 Enable javascript for this site: The icon indicates whether the javascript setting is enabled in browser. Enable cooki

IMB-S90 IPMI User’s Manual 150 Port # Owner Module Usage 1900 uPnP discovery Used for uPnP based BMC discovery 50000 uPnP discovery Us

IMB-S90 IPMI User’s Manual 151 A.3 KVM Sharing Scenario A.3.1 Scenario 1: KVM Client KVM Vmedia (Jviewer) VMCLI Client 1 Connected Connec

IMB-S90 IPMI User’s Manual 152 Interface Channel Number Primary IPMB Channel 0x00 Secondary IPMB Channel 0x06 System Interface 0x0f SMM Int

IMB-S90 IPMI User’s Manual 153 Net Function Command Command Name Supported Parameters M/O 0x06 0x0A Get Command Support O 0x06 0x0

IMB-S90 IPMI User’s Manual 154 Net Function Command Command Name Supported Parameters M/O 0x06 0x31 Get Message Flags M 0x06 0x32

IMB-S90 IPMI User’s Manual 155 Net Function Command Command Name Supported Parameters M/O 0x06 0x42 Get Channel Info Command O 0x06 0x

IMB-S90 IPMI User’s Manual 156 Net Function Command Command Name Supported Parameters M/O System name -0x2 Primary Operating System Name -

IMB-S90 IPMI User’s Manual 157 Net Function Command Command Name Supported Parameters M/O 0x06 0x50 Get Channel OEM Payload Info O 0x06 0x

IMB-S90 IPMI User’s Manual 158 Net Function Command Command Name Supported Parameters M/O 0x00 0x06 Get System Restart Cause O 0x00 0x08 Set

IMB-S90 IPMI User’s Manual 159 Net Function Command Command Name Supported Parameters M/O 0x02 0x02 Get ICMB Address O 0x02 0x03

IMB-S90 IPMI User’s Manual 16 • Auto Video Recording • Maintenance • Firmware Update A screenshot is of the menu bar is given below. Menu Bar 3.3

IMB-S90 IPMI User’s Manual 160 Bridging Commands Net Function Command Command Name Supported Parameters M/O 0x02 0x20 Bridge Request O

IMB-S90 IPMI User’s Manual 161 Net Function Command Command Name Supported Parameters M/O Event Generator M/O Event Receiver M/O 0x04 0x01

IMB-S90 IPMI User’s Manual 162 Net Function Command Command Name Supported Parameters M/O Event Generator M/O Event Receiver M/O Number

IMB-S90 IPMI User’s Manual 163 Net Function Command Command Name Supported Parameters M/O Event Generator M/O Event Receiver M/O Event F

IMB-S90 IPMI User’s Manual 164 Net Function Command Command Name Supported Parameters M/O Event Generator M/O Event Receiver M/O 0x04 0x20

IMB-S90 IPMI User’s Manual 165 Net Function Command Command Name Supported Parameters M/O Event Generator M/O Event Receiver M/O 0x04 0x2B

IMB-S90 IPMI User’s Manual 166 SDR Repository commands Net Function Command Command Name Supported Parameters M/O 0x0a 0x20 Get SDR Reposi

IMB-S90 IPMI User’s Manual 167 Net Function Command Command Name Supported Parameters M/O 0x0a 0x43 Get SEL Entry M 0x0a 0x44 Add

IMB-S90 IPMI User’s Manual 168 Net Function Command Command Name Supported Parameters M/O IP Address Source -0x4 MAC Address

IMB-S90 IPMI User’s Manual 169 Net Function Command Command Name Supported Parameters M/O Destinations Destination Type -0x12

IMB-S90 IPMI User’s Manual 17 Logout: Click the icon to log out of the MegaRAC® GUI. HELP: Click to view the help page. 3.4 Dashboard The D

IMB-S90 IPMI User’s Manual 170 Net Function Command Command Name Supported Parameters M/O Gateway IPv6 DNS settings -0x203 IPv6

IMB-S90 IPMI User’s Manual 171 Net Function Command Command Name Supported Parameters M/O Port Number BMC Generated ARP control -0xa

IMB-S90 IPMI User’s Manual 172 Net Function Command Command Name Supported Parameters M/O Cipher Suite Entry Entries -0x17 Cipher

IMB-S90 IPMI User’s Manual 173 Serial/Modem Device Commands Net Function Command Command Name Supported Parameters M/O Set In Progress -0x1

IMB-S90 IPMI User’s Manual 174 Net Function Command Command Name Supported Parameters M/O SOL Enable -0x1 SOL Authentication

IMB-S90 IPMI User’s Manual 175 Net Function Command Command Name Supported Parameters M/O SOL Payload Channel -0x7 SOL Payload

IMB-S90 IPMI User’s Manual 176 Net Function Command Command Name Supported Parameters M/O 0x32 0x0027 YAFU Verify Flash O 0x32 0x0

IMB-S90 IPMI User’s Manual 177 AMI LAN Info Commands Net Function Command Command Name Supported Parameters M/O 0x32 0x60 Get Channel Num

IMB-S90 IPMI User’s Manual 178 Net Function Command Command Name Supported Parameters M/O EnableDisable SMTP Authentication -0xb SMT

IMB-S90 IPMI User’s Manual 179 Net Function Command Command Name Supported Parameters M/O SMTP User ID -0x5 SMTP Subject -0x

IMB-S90 IPMI User’s Manual 18 • MAC Address: Read only field showing the IP address of the device. • V4 Network Mode: The v4 network mode of the d

IMB-S90 IPMI User’s Manual 180 Net Function Command Command Name Supported Parameters M/O SMTP2 IPv6 Server Addr -0x15 0x32 0x63

IMB-S90 IPMI User’s Manual 181 AMI Get Bios Code Commands Net Function Command Command Name Supported Parameters M/O 0x32 0x73 Get Bios C

IMB-S90 IPMI User’s Manual 182 AMI Firewall Commands Net Function Command Command Name Supported Parameters M/O Block IPV4 -0x0 Block IPV4 R

IMB-S90 IPMI User’s Manual 183 AMI FRU Commands Net Function Command Command Name Supported Parameters M/O 0x32 0x80 Get FRU Details

IMB-S90 IPMI User’s Manual 184 AMI Get SOL Configuration Command Net Function Command Command Name Supported Parameters M/O 0x32 0x96 Get

IMB-S90 IPMI User’s Manual 185 AMI SNMP Configuration Commands Net Function Command Command Name Supported Parameters M/O 0x32 0x7c Get S

IMB-S90 IPMI User’s Manual 186 AMI TFTP Firmware Update Commands Net Function Command Command Name Supported Parameters M/O 0x32 0x87 Sta

IMB-S90 IPMI User’s Manual 187 A.5.6 APML Commands SB-RMI Commands Net Function Command Command Name Supported Parameters M/O 0x36 0x01 G

IMB-S90 IPMI User’s Manual 188 SB-TSI Commands Net Function Command Command Name Supported Parameters M/O 0x36 0x0D Read TSI Register

IMB-S90 IPMI User’s Manual 189 Net Function Command Command Name Supported Parameters M/O Info 0x2c 0x08 Set Asset Tag M 0x2c 0x09

IMB-S90 IPMI User’s Manual 19 FRU Information Page The following fields are displayed here for the selected device. 3.5.1 Basic Information • FRU

IMB-S90 IPMI User’s Manual 190 Remote Images service commands Net Function Command Command Name Supported Parameters M/O 0x32 0x9E Get RI

IMB-S90 IPMI User’s Manual 191 Getting Service Contact us should you require any service or assistance. ADLINK Technology, Inc. Address: 9F, N

IMB-S90 IPMI User’s Manual 192 ADLINK Technology, Inc. (French Liaison Office) Address: 15 rue Emile Baudot, 91300 Massy CEDEX, France Tel: +33

IMB-S90 IPMI User’s Manual 2 Revision History Rev Date Description 1.00 22/11/2013 Initial release

IMB-S90 IPMI User’s Manual 20 3.5.3 Board Information • Board Information Area Format Version • Language • Manufacture Date Time • Board Manufact

IMB-S90 IPMI User’s Manual 21 A screenshot displaying the menu items under Server Health is shown below. Server Health – Menu A detailed descriptio

IMB-S90 IPMI User’s Manual 22 that you want to display in the list. Some examples of other sensors include Temperature Sensors, Fan Sensors, and Vo

IMB-S90 IPMI User’s Manual 23 3.6.1.3 Threshold Settings The threshold settings can be configured by clicking this button. A sample screenshot is g

IMB-S90 IPMI User’s Manual 24 To open the Event Log page, click Server Health > Event Log from the menu bar. A sample screenshot of Event Log pag

IMB-S90 IPMI User’s Manual 25 3.6.2.1 Procedure: 1. From the Event Log Category drop down menu, select the event categories. 2. From the Filter Typ

IMB-S90 IPMI User’s Manual 26 3.6.3.1 Procedure To view System Log, click the System Log tab to view all system events. Entries can be filtered base

IMB-S90 IPMI User’s Manual 27 3.7 Configuration Group This group of pages allows you to access various configuration settings. A screenshot of Con

IMB-S90 IPMI User’s Manual 28 Active Directory Settings Page The fields of Active Directory page are explained below. Advanced Settings: This optio

IMB-S90 IPMI User’s Manual 29 Advanced Active Directory Settings Page 2. In the Active Directory Settings, Page, check or uncheck the Enable check

IMB-S90 IPMI User’s Manual 3 Preface Copyright 2013 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. A

IMB-S90 IPMI User’s Manual 30 6. Configure IP addresses in Domain Controller Server Address1, Domain Controller Server Address2 & Domain Contr

IMB-S90 IPMI User’s Manual 31 12. In the Role Group Privilege field, enter the level of privilege to assign to this role group. 13. In the Exten

IMB-S90 IPMI User’s Manual 32 DNS Server Settings Page The fields of DNS Server Settings page are explained below. 3.7.2.1 Host configuration •

IMB-S90 IPMI User’s Manual 33 New TSIG Private File: Browse and navigate to the TSIG private file. Note: TSIG file should be of private type 3.7.2.

IMB-S90 IPMI User’s Manual 34 3.7.2.5.1 Procedure: 1. Choose the Host Configuration either Automatic or Manual Note: If you choose Automatic, you

IMB-S90 IPMI User’s Manual 35 System Event Log Page The fields of System Event Log page are explained below. Current Event Log Policy: Displays the

IMB-S90 IPMI User’s Manual 36 Images Redirection The fields of Images Redirection page are explained below. • Local Media • Remote Media 3.7.4.1 Ad

IMB-S90 IPMI User’s Manual 37 Share Type: Share Type of the remote media server either NFS or Samba(CIFS). Username, Password and Domain Name: If sh

IMB-S90 IPMI User’s Manual 38 4. To replace an image, select a configured slot and click Replace Image to replace the existing image. Alternatively

IMB-S90 IPMI User’s Manual 39 Note: The Start Redirection button is active only for VMedia enabled users. 2. Select a configured slot and click Sta

IMB-S90 IPMI User’s Manual 4 Table of Contents 1 Introduction...

IMB-S90 IPMI User’s Manual 40 The fields of LDAP/E-Directory Settings Page are explained below. Advanced Settings: To configure LDAP/E-Directory Adv

IMB-S90 IPMI User’s Manual 41 Note: Default Port is 389. For Secure connection, default port is 636. 5. Specify the Bind DN: Note: Bind DN is a stri

IMB-S90 IPMI User’s Manual 42 Add Role group Page 11. In the Role Group Name field, enter the name that identifies the role group. Note: Role Gro

IMB-S90 IPMI User’s Manual 43 3.7.6 License The License page is used to display the available services and it’s validity period. To open License pa

IMB-S90 IPMI User’s Manual 44 3.7.7 Mouse Mode In MegaRAC GUI, Redirection Console handles mouse emulation from local window to remote screen in eit

IMB-S90 IPMI User’s Manual 45 Note: Recommended for SLES-11 OS Installation 2. Click Save button to save the changes made. 3. Click Reset to reset

IMB-S90 IPMI User’s Manual 46 3.7.9 Network In MegaRAC GUI, the Network Settings Page is used to configure the network settings for the available LA

IMB-S90 IPMI User’s Manual 47 Note: • IP Address made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx”. • Each Number ranges from 0 to 255.

IMB-S90 IPMI User’s Manual 48 3. In IPv4 Configuration, enable Use DHCP to Obtain an IP address automatically to dynamically configure IPv4 address

IMB-S90 IPMI User’s Manual 49 Link Speed: Link speed will list all the supported capabilities of the network interface. It can be 10/100/1000 Mbps.

IMB-S90 IPMI User’s Manual 5 3.4 Dashboard ...

IMB-S90 IPMI User’s Manual 50 The fields of Configuration – NTP are explained below. Date: To specify the current date of the device Time: To specif

IMB-S90 IPMI User’s Manual 51 3.7.13 PAM Ordering This page is used to configure the PAM ordering for user authentication in to the BMC. To open PAM

IMB-S90 IPMI User’s Manual 52 In MegaRAC GUI, the PEF Management is used to configure the following • Event Filter • Alert Policy • LAN Destination

IMB-S90 IPMI User’s Manual 53 Sensor Name: To choose the particular sensor from the sensor list. Add: To add the new event filter entry and return

IMB-S90 IPMI User’s Manual 54 3. In the Event Filter Configuration section, • PEF ID displays the ID for configured PEF entry (read-only). • In Fi

IMB-S90 IPMI User’s Manual 55 Note: Value ranges from 1 to 255. • Event Data 1 AND Mask field is used to indicate wildcarded or compared bits. Note

IMB-S90 IPMI User’s Manual 56 3.7.14.2 Alert Policy Tab This page is used to configure the Alert Policy for the PEF configuration. You can add, dele

IMB-S90 IPMI User’s Manual 57 Destination Selector: To choose a particular destination from the configured destination list. Note: LAN Destination

IMB-S90 IPMI User’s Manual 58 Policy Entry page, then you have to configure the 4th slot (LAN Destination Number 4) in the LAN Destination tab. 9. I

IMB-S90 IPMI User’s Manual 59 Destination Type: Destination type can be either an SNMP Trap or an Email alert. For Email alerts, the 3 fields - dest

IMB-S90 IPMI User’s Manual 6 3.7.13 PAM Ordering...

IMB-S90 IPMI User’s Manual 60 4. In the Destination Type field, select the one of the types. 5. In the Destination Address field, enter the destinat

IMB-S90 IPMI User’s Manual 61 @brief checks if error type is IPMI_ERROR_FLAG */ #define IS_IPMI_ERROR(x)(((x)>>8) == IPMI_ERROR_FLAG ) /**

IMB-S90 IPMI User’s Manual 62 #define LIBIPMI_E_INTEGRITY_ALG_UNSUPPORTED 0x63 #define LIBIPMI_E_CONFIDENTIALITY_ALG_UNSUPPORTED 0x64 #define L

IMB-S90 IPMI User’s Manual 63 The fields of RADIUS Settings Page are explained below. RADIUS Authentication: Option to enable/disable RADIUS authent

IMB-S90 IPMI User’s Manual 64 Example: 2 testoperator Auth-Type := PAP,Cleartext-Password := “operator” Auth-Type :=PAP, Vendor-Specific=”H=3” If yo

IMB-S90 IPMI User’s Manual 65 Media Encryption: Enable/Disable encryption on Media data for the next redirection session. Note: This option is disab

IMB-S90 IPMI User’s Manual 66 Services Page The fields of Services Page are explained below. Service Name: Displays service name of the selected sl

IMB-S90 IPMI User’s Manual 67 Note: Telnet service will not support secure port. If single port feature is enabled, KVM, CD Media, FD Media and HD M

IMB-S90 IPMI User’s Manual 68 5. Choose any one of the available interfaces from the Interface drop-down list. 6. Enter the Nonsecure port number

IMB-S90 IPMI User’s Manual 69 Note: • Machine Name is a string of maximum 15 alpha-numeric characters. • Space, special characters are not allowed

IMB-S90 IPMI User’s Manual 7 3.14 FLASH Tools ...

IMB-S90 IPMI User’s Manual 70 Secondary SMTP Server: It lists the Secondary SMTP Server configuration. It is an optional field. If the Primary SMTP

IMB-S90 IPMI User’s Manual 71 To open SSL Certificate Configuration page, click Configuration > SSL from the menu bar. There are three tabs in t

IMB-S90 IPMI User’s Manual 72 SSL Certificate Configuration – Generate SSL The fields of SSL Certificate Configuration – Generate SSL tab are expla

IMB-S90 IPMI User’s Manual 73 Country(C): Country code of the organization (mandatory). • Only two characters are allowed. • Special characters ar

IMB-S90 IPMI User’s Manual 74 Basic Information: This section displays the basic information about the uploaded SSL certificate. It displays the fol

IMB-S90 IPMI User’s Manual 75 • The Common Name for which the certificate is to be generated. • The Name of the Organization for which the certifica

IMB-S90 IPMI User’s Manual 76 System and Audit Log Settings The fields of System and Audit Log Settings Page are explained below. System Log: This

IMB-S90 IPMI User’s Manual 77 3.7.20.1 Procedure 1. In the System Log field, enable or disable the option. 2. Select the Log type: Local Log or Remo

IMB-S90 IPMI User’s Manual 78 2. Block All blocks all the incoming IP’s and Port’s. Check this option to enable this feature. 3. Flush All is to f

IMB-S90 IPMI User’s Manual 79 Add IP rule 2. In the Add new rule for IP window, Enter the IP address or a range of IP addresses in the IP/IP range

IMB-S90 IPMI User’s Manual 8 1 Introduction 1.1 Notes This document describes the operation of AMI’s MegaRAC SP-X firmware adapted for the ADLINK IM

IMB-S90 IPMI User’s Manual 80 Protocol: Lists all the configured protocols of particular port or port ranges. Port Settings: To indicate the corresp

IMB-S90 IPMI User’s Manual 81 User Management The fields of User Management Page are explained below. User ID: Displays the ID number of the user.

IMB-S90 IPMI User’s Manual 82 Add User Page 2. Enter the name of the user in the User Name field. Note: • User Name is a string of 4 to 16 alpha-

IMB-S90 IPMI User’s Manual 83 8. Choose the SNMP Access level option for user from the SNMP Access drop-down list. Either it can be Read Only or Re

IMB-S90 IPMI User’s Manual 84 Modify User Page 16. Edit the required fields. 17. To change the password, enable the Change Password option. 18. Aft

IMB-S90 IPMI User’s Manual 85 3.7.22 Virtual Media In MegaRAC GUI, this page to configure Virtual Media device settings. If you change the configur

IMB-S90 IPMI User’s Manual 86 Note: If there are two device panels for each device, and when you click the Connect button, then the redirected devic

IMB-S90 IPMI User’s Manual 87 • RHEL 4 - 32 bit • RHEL 4 - 64 bit • RHEL 5.4 - 32 bit • RHEL 5.4 - 64 bit • RHEL 6.0 - 64 bit • RHEL 6.0 - 32

IMB-S90 IPMI User’s Manual 88 3.8.1.2 List of Supported Host OS • RHEL 5 • RHEL 5.3 • RHEL 5.4 • RHEL 6 • w2k3 • w2k8 • Windows 2008 R2 • W

IMB-S90 IPMI User’s Manual 89 3.8.1.4.1 Procedure In MegaRAC GUI, the Java Console can be launched in two ways 1. Open the Dashboard Page and in Re

IMB-S90 IPMI User’s Manual 9 2 SP-X Features 2.1 IPMI Message Interface Support • KCS (System Interface Support) • LAN • USB 2.2 Media Redirecti

IMB-S90 IPMI User’s Manual 90 Turn OFF Host Display/ *Host Video Output: If you enable this option, the server display will be blank but you can vie

IMB-S90 IPMI User’s Manual 91 3.8.1.7 Mouse Show Cursor: This menu item can be used to show or hide the local mouse cursor on the remote client syst

IMB-S90 IPMI User’s Manual 92 Zoom: Note: This option is available only when you launch the Java Console. • Zoom In – For increasing the screen siz

IMB-S90 IPMI User’s Manual 93 3.8.1.9 Media Virtual Media Wizard: To add or modify a media, select and click ‘Virtual Media Wizard’ button, which po

IMB-S90 IPMI User’s Manual 94 CD/DVD Media: This menu item can be used to start or stop the redirection of a physical DVD/ CD-ROM drive and cd image

IMB-S90 IPMI User’s Manual 95 9. German (Switzerland) 10. Norwegian (Norway) 11. Portuguese (Portugal) 12. Swedish 13. Hebrew 14. French (Belgium) 1

IMB-S90 IPMI User’s Manual 96 1. Click Video Record > Settings to open the settings page as shown in the screenshot below. Video Record Settings

IMB-S90 IPMI User’s Manual 97 3.8.1.13 Active Users Click this option to displays the active users and their system ip address. 3.8.1.14 Help Jviewe

IMB-S90 IPMI User’s Manual 98 Quick Buttons Explanation Active Users This quick button will work like toggle button if icon is in green color s

IMB-S90 IPMI User’s Manual 99 Power Cycle Server: This option will first power off, and then reboot the system (cold boot). Perform Action: Click th