Adlink Express-HLE Manual do Utilizador descarregar pdf (Página 41)

Express-HLE Page 41

5.1 Board Specific SEMA Functions

5.1.1 Voltages

The BMC of the Express-HLE implements a voltage monitor and samples several onboard voltages. The voltages can be read by calling the

SEMA function “Get Voltages”. The function returns a 16-bit value divided into high-byte (MSB) and low-byte (LSB).

ADC Channel Voltage Name Voltage Formula [V]

0 --- ---

1 +V3.3S (MSB<<8 + LSB) x 1.100 x 3.3 / 1024

2 +V1.05S (MSB<<8 + LSB) x 3.3 / 1024

3 +V3.3A (MSB<<8 + LSB) x 1.100 x 3.3 / 1024

4 +VDDQ (V1.35 ~ V1.5) (MSB<<8 + LSB) x 3.3 / 1024

5 +V5A_DUAL (MSB<<8 + LSB) x 1.833 x 3.3 / 1024

6 +VIN (MSB<<8 + LSB) x 6.000 x 3.3 / 1024

7 (MAIN CURRENT) Use Main Current Function

5.1.2 Main Current

The BMC of the Express-HLE implements a current monitor. The current can be read by calling the SEMA function “Get Main Current”. The

function returns four 16-bit values divided in high-byte (MSB) and low-byte (LSB). These 4 values represent the last 4 currents drawn by the

board. The values are sampled every 250ms. The order of the 4 values is NOT in chronological order. Access by the BMC may increase the

drawn current of the whole system. In this case, there are still 3 samples not influenced by the read access.

Main Current = (MSB_n<<8 + LSB_n) x 8.06mA

5.1.3 BMC Status

This register shows the status of BMC controlled signals on the Express-HL.

Status Bit Signal

0 WDT_OUT

1 LVDS_VDDEN

2 LVDS_BKLTEN

3 BIOS_MODE

4 POSTWDT_DISn

5 SEL_BIOS

6 BIOS_DIS0n

7 BIOS_DIS1n

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 88 89

Sem comentários

Adlink Express-HLE Manual do Utilizador Página 41